|
BILLET TWIN GEAR PUMP $575
The Billet Twin Gear Pump (right) is the the absolute best mechanical pump on the market. Yes, we are pround of this unit.
This remarkable pump weighs less than two pounds and features all billet construction, sealed needle bearings (no bushings) and the gears and wear plates have a special coating to promote extended durability. Service to this pump has been almost non-existent since its inception.
Due to it's extremely small profile, 360* adjustable drive collar and 3-port outlet flange this pump is an excellent choice for tight spaces.
This pump can be ordered with a hex shaft or D-shaft. The D-shaft makes it a direct, bolt-on replacement for the vane pump. No need to buy new pulleys and mounts when making this upgrade from the vane pump.
#4002BTGP "0" - supports up to 750 HP**
#4003BTGP "0-1/2" - supports 650-1100 HP**
#4004BTGP "1" - supports over 1000 HP**
|

POPULAR BLACK GEAR AND BILLET TWIN GEAR PUMP MOUNT KITS
#4011-2 BBC Low Mount
#4010-2 SBC Low Mount
#4011-5 BBFord Hi-Mount
*Mount Kits are available for virtually every engine make. Contact a KillerRONS.COM consultant if you don't see your applications
|

|
|
VANE PUMP $275
The Vane Pump (right) is the economical alternative to the above fuel pumps.
This pump utilizes a vane design that, unfortunatelty, makes it a "wear item" as well as have a non-linear fuel curve making it more difficult to tune.
That being said, if stored properly and a careful eye is focused on its output levels over time the user can expect several years of good service from this unit.
It must be noted that this pump utilizes significantly differently mounting hardware and pulleys from the gear pumps. Consult the KillerRONS.COM technicians when considering making pump and mount kit changes where this pump is involved.
Click here to read why this pump isn't highly recommended to KillerRONS.COM customers.
#4001B-100D "0" **
#4001B-125D "0-1/2" **
|

|
 |